Micro tip (Pack size: 2)
€3.20
Product information "Micro tip (Pack size: 2)"
Characteristics: For horizontal and vertical, point- and stroked accurate, economical dosages. The airtight closure cap solves the classic version, to close the glue bottle with wax or a needle from. Due to the tapered shape of the micro-capillary can be shortened, whereby each tip diameter specifically desired to be achieved. Fit for all sizes.
Application and Storage: We recommend the use and storage with the micro tip. Put the micro tip firmly on the bottle tip. Now the adhesive can be applied accurately. After use, hold the bottle vertically and withdraw the adhesive completely by slightly pressing the bottle. Now seal the micro tip hermetically with the corresponding closing cap. The micro tip can be cleaned with acetone (insert for several hours).
Informations and pricelists with graduation (season prices from 6 pieces per product) on request.
Schwanheimer Industriekleber GmbH
Kurzgewann 3
D-69436 Schwanheim
Telefon: +49(0)6262-3431 + 5461
Fax: +49(0)6262-2406
E-Mail: info@schwanheimer-industriekleber.de
Accessory Items
Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request. Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax: +49(0)6262-2406E-Mail: info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 100Technical data sheet Nr 100
Content: 10 Gramm (€1,630.00 / 1000 Gramm)
Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request. Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax: +49(0)6262-2406E-Mail: info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 100Technical data sheet Nr 100
Content: 50 Gramm (€938.00 / 1000 Gramm)
Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request. Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax: +49(0)6262-2406E-Mail: info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 100Technical data sheet Nr 100
Content: 20 Gramm (€1,175.00 / 1000 Gramm)